About Tire Recappers
At Tire Recappers, all of our casings are carefully inspected before being remolded. Our tires are thoroughly buffed to remove old tread, allowing new, top-quality material to adhere to the casing during the recapping process. Once the recapping process has been completed, each tire undergoes a careful final inspection.
We have been manufacturing high-quality, environmentally conscious, and affordable tires in the Nashville area since 1960.
You can expect at least 1500 miles per 1/32” of tread depth.
The tread design shown is the exact tread design you will be receiving; however, the sidewalls may differ from the online pictures. The brand on the casing sidewall you receive may differ from our online pictures. Some of the brands we use are Michelin, Bridgestone Firestone, Kelly, Cooper, Bfg, Nitto and more.
Due to casing supply, we cannot guarantee a matched set of four. Any set of four tires will always have the same load range. To specify a set of four matching sidewalls select match set, a specific brand, or a specific load range, please call our toll-free shop line at 855-507-3227. Please note: this may delay shipping.
Afraid not. We exclusively use graded casings from established casing suppliers and don’t offer this service to our online customers.
About Retread Tires
Modern retread tires are cost-effective, environmentally friendly, and are safe for commercial, recreational. and personal vehicles. Retread tires cost a fraction of new tires, save 400 billion gallons of oil used in tire production annually, and federal regulations have mandated the use of retread tires on fleet vehicles since 2000.
NEVER run a tire (retread or OEM) at less than manufacturer recommended tire pressures. If your tire pressure is too low it can lead to unsafe driving conditions, cause premature tire wear and/or failure, and can lower your gas mileage The correct air pressure for your tires can be found on the sidewall of the tire. Running the tires at less than recommended pressure also voids all Warranties.
To minimize the chance of unexpected air leaks, our Tire Experts always recommend replacing the valve stems when you’ve bought a new set of tires.
All of Tire Recapper tires balance out the same as new tires. We recommend using the the Static method instead of Dynamic Method of balancing, and to evenly distribute on both sides of wheels where applicable. If your local shop, garage, or mechanic has any questions, they can call the Tire Recappers Shop Line (855-507-3227) and talk with one of our Tire Specialists.
Yes. Our farm, construction, and truck tires are frequently used for towing. Be sure to adjust your air pressure for your towing load capacity.
Yes. Tire Recappers is a DOT regulated business and we stamp our DOT number in the sidewall of every tire we make. Retreads are legal to put on any passenger vehicle and most commercial vehicles. Some states do not allow re-treads on the steering axle of certain commercial vehicles. Check with your local Department of Transportation for more information.
Any nail hole or other repairable leak can be patched in the same fashion as a newly manufactured tire, from the inside out. External plugging repairs may void your warranty and we do not recommend the process for any tire.
Shipping & Returns
We ship within 24-48 hours of receipt of payment and you can track your order online using the tracking number on your order. orders with alternate shipping address may require longer processing times. As long as there are no weather delays, most US deliveries occur within 4-6 transit days; however, if you haven’t received your tires within 5 business day after payment, call us at 855-507-3227.
We ship to the lower 48 states. Shipping not available to Alaska and Hawaii.
We do not accept returns without a previously issued RMA (Return Material Authorization) number. For more information regarding our returns policy, visit our returns page.
We will accept returns within 30 days of delivery only.
Credits will be issued to the credit/debit card used on the order.